ACROLINK
Cable materials & Specifications
| Conductor | 7N Cu D.U.C.C Stressfree 0.37Φ x 50 strands x 2 cores(AWG 10) 4N5 Cu for ground 0.37Φ x 50 strands(AWG 10) |
|
| Insulation material | High molecular Polyolefin Resin(Black & White & Green) | |
| 1st Inner sleeve | High molecular Polyolefin + tungsten + amorphous + carbon powder | |
| 2nd Inner sleeve | Polyolefin with Resonance control powder | |
| Final shielding | Polyurethane enameled wire(Black) + Silver plated copper(Silver) braided wire | |
| Outer sleeve | UV resistant Polyurethane | |
| Conductor resistance | 3.3mΩ/m | |
| Cable diameter | 16.0mm |
Power plug & IEC connector
| Contact parts | Beryllium copper | |
| Plating | Silver layered rhodium(polished before plating) | |
| Body | Special resin + brass + carbon fiber + aluminum Black anodized aluminum specially for 7N-PC8100 Leggenda |
|
| Standard length of 7N-PC8100 Leggenda is 1.5m. Special length order is available. |
||
| D.U.C.C stands for Dia Ultra Crystallized Copper which is specifically developed copper wire for high-end audio cables. D.U.C.C has controlled crystal structure and the minimized transmission loss. Patent technology and registered trade mark of Mitsubishi Materials LTD. | ||
| Noise BEAT tape is a thin aluminum resin tape which is able to efficiently absorb noise current. Developed and trade mark of NTT AT(Nippon Telegraph and Telephone Corporation Advanced Technology) | ||
Typical Analysis impurities
| Fe | Ni | Si | Al |
| 0.03 | 0.003 | 0.04 | 0.005 |
| S | Ag | Na | K |
| 0.05 | 0.04 | 0.004 | < 0.005 |
| U | Th | H | O |
| < 0.0002 | < 0.0003 | < 0.03 | < 1.0 |
FreightDescription
運費說明